SW-Combi

Description:

SW-COMBI is a flexible, cold-formable composite of glass fiber reinforced mica paper (Phlogopite or Muscovite) and soluble fiber (calcium silica) paper with special binder. SW-COMBI is asbestos free and resists tearing.

Application:

SW-COMBI is used as slip plane and coil insulation for the coreless induction furnace.

Supply Form:

Thickness:
SW-COMBI 21 = 2.3 mm (with 10 kPa ± 10%)
SW-COMBI 21 G = 2.3 mm (with 10 kPa ± 10%)
SW-COMBI 22 = 2.4 mm (with 10 kPa ± 10%)
SW-COMBI 22 G = 2.4 mm (with 10 kPa ± 10%)
SW-COMBI 23 = 2.5 mm (with 10 kPa ± 10%)
SW-COMBI 23 G = 2.5 mm (with 10 kPa ± 10%)
SW-COMBI 31 = 3.3 mm (with 10 kPa ± 10%)
SW-COMBI 31 G = 3.3 mm (with 10 kPa ± 10%)
SW-COMBI 32 = 3.4 mm (with 10 kPa ± 10%)
SW-COMBI 32 G = 3.4 mm (with 10 kPa ± 10%)
SW-COMBI 33 = 3.5 mm (with 10 kPa ± 10%)
SW-COMBI 33 G = 3.5 mm (with 10 kPa ± 10%)

Customized combinations with Calcium Silica Fiber of 1, 4 or 5 mm or with glass fiber reinforced Muscovite mica paper are possible upon special request.

Widths and length:
Rolls: 1 m width x 25 or 12.5 m length
OR 0.5 m width x 20 m length
G = rolls with mica side visible.